ESL10          

Standard Features:

• Replaces most mechanical combination locks. Easy installation and operation.
• Combination changes are fast and easy from the keypad.
• Factory Reset Combination for solving lost combinations without requiring expensive service calls.
• Two 9 V DC batteries in the keypad housing can be changed easily.
• Audible beep and flash from every keystroke gives maximum feedback to the user.
• New industrial "Soft Touch" membrane keypad is tough yet requires very low activation pressure.
• 15 minute penalty lockout after 4 incorrect entries protects against manipulation attempts.
• New patented dead-latched lock design with an internal relock device for maximum security.
• Lock "auto-locks" when boltwork is thrown to prevent safes from being left in a "daylock" position.
• ESL20 additional features: Time Delay Mode, Multiple User Mode, Dual Control Mode, Armored Car Override, External A/C Power, Control Port.
• Optional Expansion Module (ESL20EXP) provides duress alarm output, external connection for A/C power, external connection for control port and connection of one or two ESL20 locks.

INFORMATION

•  

  All entries begin with the "C" key and end with the "#" key.

      Example if your code is 123456, it must be entered as C 1 2 3 4 5 6 #

• With each keystroke the red lamp should light and a chirp should sound.Lock-out feature will engage after 4 incorrect combination entries.
• The lock-out penalty is 15 minutes, during which the red light will flash once every five seconds. If a button is pressed while the lock is in the lock-out mode, the light will flash together with a chirp 8 times rapidly.
• Combination is a fixed length of 6 digits, However, the lock registers the first five digits (after the "C") and the last digit pressed prior to the "#" key. This will help baffle any on-lookers.

Example: if you enter C - 1 - 2 - 3 - 4 - 5 - 7 - 3 - 4 - 9 - 1 - 6 - # , only the entries in yellow are recognized.

• You must know the existing combination.
• Keep door in the open position while changing and testing your new combination!!
• Have your new combination written down before changing

1. Enter C, #, the existing combination, followed by the #. Example if your existing combination is 123456, enter the following C # 1 2 3 4 5 6 #

2. Enter your NEW 6 digit combination followed by the "#" key.
   1. If the new code is an acceptable 6 digit combination, you will here same worble tone as previously heard. -Go to step 3.
   2. If there is a problem with the combination you are trying to enter, you will hear 4 short beeps and the process is aborted (the old combination will be retained)

3. Re-enter your NEW 6 digit combination followed by the "#" key.
   1. If the combination matches, a long tone is heard. The new combination has been successfully changed - Go to step 4.
   2. If the second entry does not match the first entry, 4 short beeps will be heard and the process will be aborted (the old combination will be retained).

4. Test your new combination several times with the door in the open postion

  E-Mail us any questions or comments you may have

L. I. LOCKSMITH & ALARM CO., INC.

"Your Security Technology Company"

26 WEST OLD COUNTRY ROAD - HICKSVILLE NY 11801 (516) 931-2273 Fax: (516) 931-7334 www.lilocksmith.com