Standard Dial

AMSEC   GARDALL WILSON 

BASIC INFORMATION FOR DIALING
  • !n each step, only concern yourself with the number you are dialing to . Once you’ve stopped at the first number, only look for the second number and so on. (Example: if your numbers are 20, 40 & 60, once you’ve stopped the dial on the number 20 in the first step, then only concern yourself with watching for the number 40 during the second step)
  • Every time a number passes the dialing index it counts as a full turn EVEN IF YOU HAVE NOT TURNED THE DIAL A FULL REVOLUTION (The dialing index is the mark/arrow on the dial ring, usually at the 12 o’clock position)
  • You must stop directly on the number. If you pass the number you are dialing to, you will have to start from the beginning.
First Step

Turn left stopping when the first number comes to the mark the 4th time.
Second Step

Turn right stopping when the second number comes to the mark the 3rd time
Third Step

Turn left stopping when the third number comes to the mark the 2nd time
Fourth Step

Turn right past “0” until the dial comes to a complete stop
Final Step If your safe has a handle – Turn the handle until it fully stops, and pull the door toward you
If your safe does not have a handle, simply pull the door toward you

While there are a variety of different safe locks used, these instructions should work with most locks using a three number combination (example: 20 – 40 – 60) except Sentry and other mass marketed / imported safes

mail.gif (3506 bytes)E-Mail us any questions or comments you may have
L. I. LOCKSMITH & ALARM CO., INC.“Your Security Technology Company”26 WEST OLD COUNTRY ROAD – HICKSVILLE NY 11801 (516) 931-2273 Fax: (516) 931-7334 www.lilocksmith.com